City of Akron Traffic Signal Roadway Equipment

Status: Existing

Description

Represents traffic signal field equipment operated and maintained by City of Akron.

Stakeholders

StakeholderRoleRole Status
City of Akron Engineering BureauOwnsExisting

Physical Objects

ITS Roadway Equipment

Functional Objects

Functional ObjectDescriptionUser Defined
Roadway Field Device Support'Roadway Field Device Support' monitors the operational status of field devices and detects and reports fault conditions. Consolidated operational status (device status, configuration, and fault information) are reported for resolution and repair. A local interface is provided to field personnel for local monitoring and diagnostics, supporting field maintenance, upgrade, repair, and replacement of field devices.False
Roadway Field Management Station Operation'Roadway Field Management Station Operation' supports direct communications between field management stations and the local field equipment under their control.False
Roadway Signal Control'Roadway Signal Control' includes the field elements that monitor and control signalized intersections. It includes the traffic signal controllers, detectors, conflict monitors, signal heads, and other ancillary equipment that supports traffic signal control. It also includes field masters, and equipment that supports communications with a central monitoring and/or control system, as applicable. The communications link supports upload and download of signal timings and other parameters and reporting of current intersection status. It represents the field equipment used in all levels of traffic signal control from basic actuated systems that operate on fixed timing plans through adaptive systems. It also supports all signalized intersection configurations, including those that accommodate pedestrians. In advanced, future implementations, environmental data may be monitored and used to support dilemma zone processing and other aspects of signal control that are sensitive to local environmental conditions.False
Roadway Signal Preemption'Roadway Signal Preemption' includes the field elements that receive signal preemption requests from emergency vehicles approaching a signalized intersection and overrides the current operation of the traffic signals to stop conflicting traffic and grant right–of–way to the approaching vehicle.False
Roadway Standard Rail Crossing'Roadway Standard Rail Crossing' manages highway traffic at highway–rail intersections (HRIs) where operational requirements do not dictate advanced features (e.g., where rail operational speeds are less than 80 miles per hour). Either passive (e.g., the crossbuck sign) or active warning systems (e.g., flashing lights and gates) are supported depending on the specific requirements for each intersection. These traditional HRI warning systems may also be augmented with other standard traffic management devices. The warning systems are activated on notification of an approaching train by interfaced wayside equipment. The equipment at the HRI may also be interconnected with adjacent signalized intersections so that local control can be adapted to highway–rail intersection activities. Health monitoring of the HRI equipment and interfaces is performed; detected abnormalities are reported through interfaces to the wayside interface equipment and the Traffic Management Center.False

Physical Standards

Document NumberTitleDescription
ITE ATC 5201Advanced Transportation ControllerThis standard defines the functionality and performance requirements for a modern ITS controller known as an ATC. It is similar to the NEMA TS–2 standard in that it defines basic capabilities but leaves hardware choices up to the manufacturer.
ITE ATC 5202Model 2070 Controller StandardThis standard specifies the hardware for a modern, open–architecture controller for ITS applications that can run Linux and is capable of executing advanced signal controller logic, among other things.
ITE ATC 5301Intelligent Transportation System Standard Specification for Roadside CabinetsThis standard specifies the characteristics of a modern controller cabinet for the ITS industry.
ITE ATC 5401Application Programming Interface Standard for the Advanced Transportation ControllerThis standard defines the application programmers' interface (API) that should be supported by an ATC, which is an open–architecture controller that can host multiple ITS applications.
NEMA TS 8Cyber and Physical Security for Intelligent Transportation SystemsThis specification describes how agencies and other transportation infrastructure owner/operators should implement cyber– and physical–security for ITS.
NEMA TS2Traffic Controller Assemblies with NTCIP RequirementsThis specification covers traffic signaling equipment used to facilitate and expedite the safe movement of pedestrians and vehicular traffic.

Interfaces To

(View Context Diagram)

City of Akron Emergency Vehicles
City of Akron Maintenance Dispatch
City of Akron Traffic Operations Center
County and City Connected Vehicles Roadside Equipment
County and City CV Service Monitoring Systems
Cyclists
Drivers
METRO RTA Fixed–Route Vehicles
Ohio CV Service Monitor System
OSHP Vehicles
PARTA Fixed–Route Vehicles
Pedestrians
Private Rail Operations Wayside Equipment
Summit County Emergency Vehicles
University of Akron Roo Express Shuttle Service Vehicles