Interface: Summit County Traffic Operations Center - County and City Connected Vehicles Roadside Equipment

Summit County Traffic Operations Center to County and City Connected Vehicles Roadside Equipment Interface Diagram

Information Flow Definitions

automated lane control data  (Future)  Selected Comm Solution

Control commands and operating parameters for automated vehicle operations, including tightly coupled platooned groups of vehicles operating in dedicated or mixed–mode lanes. This flow includes platoon parameters including maximum platoon size, target speeds and gaps, and vehicle restrictions.

automated lane status  (Future)  Selected Comm Solution

Current operational status of lanes supporting automated vehicle operations. The flow includes the status of the RSEs, associated field equipment, and vehicles using the facility.

environmental monitoring application info  (Future)  Selected Comm Solution

Environmental monitoring application parameters and thresholds that control the filtering, aggregation, and range of measures that are collected, derived, and reported. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

environmental monitoring application status  (Future)  Selected Comm Solution

Environmental monitoring application status reported by the RSE. This includes current operational state and status of the RSE and a record of system operation.

environmental situation data  (Future)  Selected Comm Solution

Aggregated and filtered vehicle environmental data collected from vehicle safety and convenience systems including measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, anti–lock brake status, and other collected vehicle system status and sensor information. This information flow represents the aggregated and filtered environmental data sets that are provided by the RSE to the back office center. Depending on the RSE configuration and implementation, the data set may also include environmental sensor station data collected by the RSE.

intersection management application info  (Future)  Selected Comm Solution

Intersection and device configuration data, including intersection geometry, and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

intersection management application status  (Future)  Selected Comm Solution

Infrastructure application status reported by the RSE. This includes current operational state and status of the RSE and a log of operations.

intersection safety application info  (Future)  Selected Comm Solution

Intersection and device configuration data, including intersection geometry, and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

intersection safety application status  (Future)  Selected Comm Solution

Infrastructure safety application status reported by the RSE. This includes current operational state and status of the RSE and a record of intersection safety issues identified and alerts and warnings issued.

queue warning application information  (Future)  Selected Comm Solution

Information regarding formed or impending queues (location of the end of queue, estimated duration of the queue, and other descriptions of the queue condition) and recommendations for upstream vehicles including speed reduction, lane change, or diversion recommendations. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

queue warning application status  (Future)  Selected Comm Solution

Queue warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and identified queues.

rail crossing application info  (Future)  Selected Comm Solution

Rail crossing and device configuration data and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

rail crossing application status  (Future)  Selected Comm Solution

Rail crossing application status reported by the RSE. This includes current operational state and status of the RSE and a record of rail crossing events and alerts and warnings issued.

road closure application info  (Future)  Selected Comm Solution

Road closure signing application configuration data and messaging parameters. This flow identifies the vehicles that may initiate the road closure. This flow also provides access lists, groups, or classifications where selected vehicles are to be allowed access to the closed area.

road closure application status  (Future)  Selected Comm Solution

Road closure application status reported by the RSE. This includes current operational state and status of the RSE, closure status, and a log of closure commands received and issued. For closures that allow entry by selected vehicles, this flow provides an access log identifying vehicles that have requested access with access status.

road weather advisory info  (Future)  Selected Comm Solution

Road weather advisories and associated configuration and control information that are used to manage the RSE. Advisories include segment–specific weather and road conditions including real–time advisories of deteriorating road and weather conditions, medium–term advisories for the next 2–12 hours, and long–term advisories more than 12 hours into the future. This flow includes a schedule for issuing the included advisories.

road weather advisory status  (Future)  Selected Comm Solution

Current RSE application status that is monitored by the back office center including the operational state of the RSE, current configuration parameters, and a log of advisories issued. The advisories may include advisories that are issued by the RSE based on locally collected environmental data (e.g., an ice on bridge advisory).

situation data collection parameters  (Future)  Selected Comm Solution

The parameters that are used to control the flow of situation data from the RSE. This flow identifies the type of data/snapshots that are requested from passing vehicles and reporting parameters such as snapshot frequency, filtering criteria (data thresholds for reporting), and reporting interval that control the type and volume of data reported to the back office center.

speed warning application info  (Future)  Selected Comm Solution

Roadway configuration data, current speed limits including time of day, week, or season speed limits as necessary, and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

speed warning application status  (Future)  Selected Comm Solution

Speed warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and notifications, alerts, and warnings issued.

stop sign gap assist info  (Future)  Selected Comm Solution

Intersection and device configuration data and warning parameters and thresholds for the stop sign gap assist application. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

stop sign gap assist RSE status  (Future)  Selected Comm Solution

Stop sign gap assist application status. This includes current operational state and status of the RSE and a log of stop sign gap assist events including alerts and warnings issued.

traffic monitoring application info  (Future)  Selected Comm Solution

Traffic monitoring application parameters and thresholds that control the filtering, aggregation, and range of measures that are collected, derived, and reported. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

traffic monitoring application status  (Future)  Selected Comm Solution

Traffic monitoring application status reported by the RSE. This includes current operational state and status of the RSE and a record of system operation.

traffic situation data  (Future)  Selected Comm Solution

Current, aggregate traffic data collected from connected vehicles that can be used to supplement or replace information collected by roadside traffic detectors. It includes raw and/or processed reported vehicle speeds, counts, and other derived measures. Raw and/or filtered vehicle control events may also be included to support incident detection.

vehicle signage application info  (Future)  Selected Comm Solution

In–vehicle signing application configuration data and messaging parameters. This flow provides a list of regulatory, warning, and information messages to be displayed and parameters that support scheduling and prioritizing messages to be issued to passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

vehicle signage application status  (Future)  Selected Comm Solution

In–vehicle signing application status reported by the RSE. This includes current operational state and status of the RSE and a log of messages sent to passing vehicles.